Osburn 2000 Wood Stove OB02015

QUALIFIES FOR TAX CREDIT (Section 25C, US Tax Code) Heats 2100 sqr ft, 20 inch log, 75,000 btu's, 77% efficiency, 2.4 Cu. Ft Fire box, 390 lbs

FEATURES

Year after year, the 2000 model remains one of the most popular wood stoves in the Osburn range.
In 2018, Osburn redefines the design of this heating appliance and sets new standards for emissions. This new version keeps its 2.4 cubic foot combustion chamber and still offers the same power with an impressive emission performance of around 1.54 g/h. With this model, the 130 CFM fan is still included; unquestionably the best opportunity this season!
Its new cast iron door gives a youthful look with elegant lines while retaining the spirit of wood heating. Customize your device to suit your décor: refined door coverings, new leg designs, glass ash lip with integrated drip tray; significant innovations for the most seasoned experts.
The Osburn 2000 is one of the most popular wood stoves by Osburn. The Osburn 2000 has a cast-iron door, which features the distinctive lines you've come to expect from Osburn, The Osburn 2000 a contemporary and the traditional look. The Osburn 2000 has a 2.4 cubic foot firebox, the Osburn 2000 will delight the most serious of wood stove enthusiasts who want both style and heating power. The Osburn 2000, also equipped with a 130 CFM blower, is the most sought-after model of the season! Purchase your Osburn 2000 today!

APPLIANCE PERFORMANCE

⁽¹⁾ Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

⁽⁾ Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.

⁽²⁾ The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

⁽³⁾ As measured per CSA B415.1-10 stack loss method.

⁽⁴⁾ Higher Heating Value of the fuel.

⁽⁵⁾ Lower Heating Value of the fuel.

⁽⁶⁾ Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

⁽⁷⁾ Optimum overall efficiency at a specific burn rate (LHV).

⁽⁸⁾ The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.

⁽⁹⁾ This appliance is officially tested and certified by an independent agency.

⁽¹⁰⁾ Carbon monoxyde.

GENERAL FEATURES

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).

** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

OSBURN 2000 WOOD STOVE MANUAL AND INSTALLATION GUIDE (Click here)

OSBURN 2000 WOOD STOVE DIMENSIONS (Click here)