My Store
Osburn Matrix 1900 Wood Insert OB01900
Osburn Matrix 1900 Wood Insert OB01900
Call to hear about our BIGGEST SALE OF THE YEAR! (516)974-9742
Order Online or Call to Order over the Phone
Couldn't load pickup availability
Share
QUALIFIES FOR TAX CREDIT (Section 25C, US Tax Code) EPA approved 2020 - Non-catalytic, Heats 250-1200 sqr ft,, 17 inch log, 45,000 btu's, 82% efficiency, 1.2 Cu. Ft Fire box, 332 lbs
FEATURES
The Osburn 1900 must be installed into a masonry fireplace.
Treat your family to incomparable comfort with the Matrix 1900 wood-burning insert. Its magnificent cast-iron faceplate is adorned with a patterned upper louver and columns that frame its large door. Its discreet black wooden handle, air control with removable handle as well as flush mount blower disappear to leave room for the delicate details of its faceplate. Its large glass surface highlights a panoramic view of the flames to fully enjoy your moments near the fire.
The Matrix 1900 is a compact unit that has tapered top and sides for easy installation in smaller hearths. The deep bottom of its combustion chamber allows ash to accumulate and reduces the frequency of cleaning.
APPLIANCE PERFORMANCE
|
|||||||||||||||||||||||||||||||||||||
(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
() Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3) As measured per CSA B415.1-10 stack loss method.
(4) Higher Heating Value of the fuel.
(5) Lower Heating Value of the fuel.
(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7) Optimum overall efficiency at a specific burn rate (LHV).
(8) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
(9) This appliance is officially tested and certified by an independent agency.
(10) Carbon monoxyde.
GENERAL FEATURES
|
OSBURN MATRIX 1900 MANUAL (Click here)
OSBURN MATRIX 1900 INSERT INSTALLATION GUIDE (Click here)
OSBURN MATRIX 1900 DIMENSIONS (Click here)
